Switch Modules & Accessories

10G | 10km | SFP+ | 1310nm

3 Meters SFP+ Direct Attach Cable

10GBASE-CU SFP+ Cable 5 Meter

Single-Mode Fiber | (1) LC | 1.25 Gbps SFP

Single-Mode Fiber | (2) LC | 10 Gbps SFP+

Catalyst 3850 4 x 10GE Network Module

10GBASE-SR SFP Module, Enterprise-Class

3810M 4-port stacking module | Aruba 3810M S | HP 2920 Switch Series

Power supplies sold separately for the HPE Aruba 3810M series modular switches.

SFP+ Module | 4-port 10GbE SFP+ | 10 Gigabit Ethernet

HPE Aruba 2930M 24 Smart Rate POE+ 1-Slot, 3810M 16SFP+ 2-slot Switch

C6K 48-port 1GE Mod: fabric-enabled with DFC4

SFP+ 10GBase-LR LITE single mode LC duplex connector up to 2km

SFP+ Transceiver 10GBASE-LR Long Range Single Mode LC Duplex Connector up to 10km

10GBase-LRM long reach multimode 802.3aq - LC duplex connector up to 220m

SFP+ Transceiver 10GBASE-SR Short Range Multimode LC Duplex Connector up to 300m

SFP Transceiver 1000BASE-LX Long Range Single Mode LC GBIC duplex connector up to 10km

SFP Transceiver 1000BASE-SX Short Range Multimode LC GBIC duplex connector up to 550m

10 Gigabit Ethernet

24W, 24VDC

1000BASE-T SFP Transceiver Module for Category 5 Copper Wire, RJ-45 Connector, Extended Temperature

Switching Network | 24 x 10/100/1000Base-T | 24 x RJ-45 10/100/1000Base-T | 10 Mbps Ethernet | 100 Mbps Fast Ethernet | 1 Gbps Gigabit Ethernet | ProCurve Switch vl 24p Gig-T module provides 24-ports of 10/100/1000-T for use in the ProCurve Switch 4200vl Series | Ethernet 1000Base-T | Ethernet 100Base-TX | Ethernet 10Base-T | IEEE 802.3 | IEEE 802.3ab | IEEE 802.3u | Wired | Auto-uplink (auto MDI/MDI-X) | Full duplex mode | Half duplex mode | Plug-in module | Expansion module | RJ-45 | Ethernet 10Base-T/100Base-TX/1000Base-T | Vl 24p Gig-T switch module | 0.56 kg

HP Switch vl 4-port Mini-GBIC Module - expansion module | Device Type: Expansion module | Form Factor: Plug-in module | Dimensions (WxDxH): 228 x 45 x 203 mm | Weight: 0.7 kg | Compatible Slots: 1 x Expansion Slot | Expansion Slot(s): 4 (total) / 4 (free) x SFP | Connectivity Technology: Wired

4 open mini-GBIC (SFP) slots | 20 RJ-45 autosensing 10/100/1000 ports(IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T) | Media Type: Auto-MDIX | Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only | Switching Network | 20 x 10/100/1000Base-T | 20 x RJ-45 10/100/1000Base-T | 10 Mbps Ethernet | 100 Mbps Fast Ethernet | 1 Gbps Gigabit Ethernet | Expansion Slots: 4 x SFP | Ethernet 1000Base-T | Ethernet 100Base-TX | Ethernet 10Base-T | IEEE 802.3 | IEEE 802.3ab | IEEE 802.3u | Wired | HTTP | RMON 1 | RMON 2 | RMON 3 | RMON 9 | SNMP 1 | SNMP 2 | SNMP 2c | RJ-45 | Ethernet 10Base-T/100Base-TX/1000Base-T | ProCurve Switch vl 20p Gig-T+ 4P SFP Module | 0.69 kg

ProCurve Gigabit-LH-LC Mini-GBIC | Manufacturer: ProCurve Networking | Connector Qty: X 2 | Connector Type: LC | Qty: 1 | Type: Ethernet 1000Base-LH | Cabling Type: Ethernet 1000Base-LH | Compliant Standards: IEEE 802.3z | Connectivity Technology: Wired | Data Link Protocol: Gigabit Ethernet | Data Transfer Rate: 1 Gbps | Features: Full duplex capability | Form Factor: Plug-in module | Ports Qty: 1 | Type: SFP (mini-GBIC) transceiver module | SFP (mini-GBIC) | A small form factor pluggable (SFP) gigabit LH transceiver that provides a full-duplex gigabit solution up to 70 km on singlemode fiber | 1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics) | Duplex: full only | Single-mode Optical Fiber | 0.02 kg

Gigabit 1000Base-T Mini-GBIC | A small form-factor pluggable (SFP) Gigabit copper transceiver that provides a full-duplex Gigabit solution up to 100 m on Category 5 or better cable | Connector Type: RJ-45 | Qty: 1 | Type: Ethernet 1000Base-T | Cabling Type: Ethernet 1000Base-T | Connectivity Technology: Wired | Data Link Protocol: Gigabit Ethernet | Data Transfer Rate: 1 Gbps | Form Factor: Plug-in module | Interface Type: Mini-GBIC | Type: SFP (mini-GBIC) transceiver module | Power consumption is nominally 1 watt.For supported platforms and minimum software requirements to support this product, see the document titled "Support for the J8177C 1000Base-T Mini-GBIC" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page | The J8177C Gigabit copper mini-GBIC is not supported on dual-personality ports | The J8177C is capable of 100 Mb operation | This is supported on only the HP ProCurve Switch 8200zl, 5400zl, and 6200yl Series using software version K.12.21 or later | Use the "auto-100" port setting to enable 100 Mb operation.Important: The earlier J8177B does not support 100 Mb operation | When used in the ProCurve Switch gl 20-Port 10/100/1000 Module (J4908A), the J8177C mini-GBIC can be installed in either the upper or lower mini-GBIC port, but will block access to the other port | 0.03 kg

J4858C | SFP (mini-GBIC) | IEEE 802.3z | 62.5/125 µm or 50/125 µm (core/cladding) diameter | graded-index | low metal content | multimode fiber optic | complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a | respectively | 1x LC 1000Base-SX port(IEEE 802.3z Type 1000Base-SX) | Duplex: full only | 220 m (62.5 µm core diameter, 160 MHz/km bandwidth) | 275 m (62.5 µm core diameter, 200 MHz/km bandwidth) | 500 m (50 µm core diameter, 400 MHz/km bandwidth) | 550 m (50 µm core diameter, 500 MHz/km bandwidth) | 1 Gbps | With one 1000Base-SX port | designed for short-distance (<550 m max.) multimode fiber connectivity | 0.02 kg | 57 x 12 x 14 mm | Gigabit Ethernet | LC multi-mode

J4859C | 1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX) | Duplex: full only | 56.9 x 12.3 x 13.7 mm | 0.02 kg | Operating temperature: 32°F to 158°F (0°C to 70°C) | Operating relative humidity: 0% to 85%, noncondensing | Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C) | Altitude: up to 10,000 ft. (3 km) | Either single mode or multimode; 62.5/125 µm or 50/125 µm (core/cladding) diameter | graded-index | low metal content | multimode fiber optic | complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a | respectively | Low metal content | single-mode fiber-optic | complying with ITU-T G.652 and ISO/IEC 793-2 Type B1 | 2-550 m (multimode 62.5 µm core diameter, 500 MHz*km bandwidth) | 2-550 m (multimode 50 µm core diameter, 400 MHz*km bandwidth) | 2-550 m (multimode 50 µm core diameter, 500 MHz*km bandwidth) | 2-10,000 m (single-mode fiber) | Wavelength: 1310nm | Power Consumption: < 500mW Typical

J9054C | 1 LC 100BASE-FX port(IEEE 802.3u Type 100BASE-FX) | Duplex: half or full | Transmitter wavelength: 1310nmPower consumption is 1.1 watt maximum | For supported platforms and minimum software requirements to support this product | see the document titled "Support for the J9054B 100-FX SFP-LC Transceiver" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page | Data Networking | Optical Network | 1 x 100Base-FX | 1 x LC Simplex 100Base-FX Network | Optical Fiber 100Base-FX | 100 Mbps Fast Ethernet | 0.03 kg | HP MSM Controller Series